Are you looking around in front of your laptop for the best Amazon eero 6 plus mesh Wi or at least a good deal of Amazon eero 6 plus mesh Wi? Well, look no further and you are just in the right place. We are very glad to do what we can to save you time searching around the web for the best products or daily good deals. You do not have to spend much time choosing your favorites from a wide range of products yourself, we do it for you! We always work hard to find almost any good deals and probably for your best choice, and carefully curate an article for that in order to present you the information needed including specs, pros & cons, and customer reviews & satisfactions. What are you waiting for? Let's check it out!
Latest model – see what’s changed
What’s changed in this version?
Each eero 6+ has two 1.0 Gb Ethernet ports
Supports speeds up to a gigabit
Support for 160 MHz client devices
We want you to know
– eero replaces your wifi router and works with most major internet service providers. Click here to learn more.
– Access to enhanced online security, ad blocking, and advanced parental controls are available via a subscription that is sold separately. Click here to learn more.
Upgraded Wi-Fi 6 supports speeds up to a gigabit
Our newest, dual-band eero leverages 160 MHz channel support to maximize your wifi. Our patented TrueMesh technology intelligently routes traffic to reduce drop-offs and dead spots. So you can keep your smart home devices connected, whether you are home or away.
Easy to set up and use
eero is the heart of the connected home
eero 6+ works as a smart home hub so you can use Alexa to control compatible Thread and Zigbee devices. Use your eero 6+ with Alexa to control lights, locks, plugs, and more.
Works with Alexa
With eero 6+ and an Alexa device (not included), you can easily manage wifi access for family profiles to take focus away from screens and back to what’s important.
Free support when you need it
If you have questions during the setup process or encounter a technical issue, our expert wifi troubleshooters are ready to help by phone in the US at +1-877-659-2347 or by emailing [email protected]
Technical Details
Amazon eero 6+ router
|
Wifi coverage |
Covers up to 3,000 sq ft |
|
Type |
Router (connects to modem as primary router) |
|
Supported speeds |
Supports ISP plans up to a gigabit |
|
Wi-Fi connectivity |
Wi-Fi 6 dual-band concurrent 2:2 (802.11ax); compatible with older wifi standards |
|
Wired connectivity |
Two auto-sensing gigabit Ethernet ports |
|
Speed Rating |
AX3000 |
|
Smart home connectivity |
Works with Alexa, Amazon Frustration Free Setup, 802.15.4 radio (Zigbee, Thread), Bluetooth Low Energy 5.0. |
|
Electrical Rating |
100-240V AC, 50-60 Hz |
|
Processor, memory, and storage |
1 GHz dual-core processor, 512MB RAM, 4GB flash storage |
|
Network security and services |
Profiles, WPA3 (eero Labs feature), WPA2, TLS v1.2+, VPN passthrough, IPv6, NAT, UPnP, port forwarding, DHCP, static IP, and cloud connectivity. |
|
Required for setup |
Supported iOS or Android device and internet service (with cable or DSL modem, if required). See requirements. |
|
Temperature Rating |
Operating: 0˚C-40˚CStorage: -25˚C-60˚COperating humidity: 0%-90%, non-condensingOperating altitude: <3000m |
|
Dimensions |
3.9 in x 3.8 in x 2.6 in (99.4 mm x 97 mm x 65.8 mm) Actual size and weight may vary by manufacturing process. |
|
Warranty and Support |
1-year limited warranty. Free customer support is available 7 days a week. Learn more about warranty and support. |
|
Software Security Updates |
This device receives guaranteed software security updates until at least five years after the device is last available for purchase as a new unit on our websites. Learn more about these software security updates. |
|
Subscription |
30-day eero Secure trial is limit one per new eero customer account. Additional terms apply, see the eero Secure Terms of Service for more details. eero Internet Backup performance will vary and you are responsible for data charges with backup connection providers. Learn more about eero Internet Backup requirements, performance, and compatibility here |
|
Legal Disclaimer |
Some features require linking your Amazon account, and downloading the Alexa application or using a compatible Alexa device. Internet connection speeds and availability depend on your internet service provider; if your internet service provider does not provide you with the maximum supported speed, you will not experience that maximum speed. Maximum network speeds, if applicable, reflect combined supported speeds across wired and wireless clients. Maximum wireless signal rates are derived from IEEE 802.11 standard. Specifications assume wired Ethernet connection; your experienced speed may vary when connected to an eero device that is configured as a wireless extender. Coverage estimates are based on normal use conditions. Actual range and performance can vary, and maximum supported speeds may not be available to all customers, due to factors such as local regulations (including power limits), network configuration, interference, connected devices, device usage, building materials, and obstructions. Specifications are based on use of a Wi-Fi 6 or later generation client device that supports 160 MHz. For more information about eero performance, visit support.eero.com. Combining eero 6+ devices with older generation eero devices on the same network may result in reduced performance across the network. |
Features & Specifications
- GIGABIT SPEEDS FOR LESS - Supports wifi speeds up to a gigabit, without the premium price tag. eero 6+ is our most affordable gigabit system ever. Backward-compatible with previous-generation eero devices.
- WI-FI 6 GETS A BANDWIDTH BOOST - eero 6+ supports additional wifi bandwidth on the 160 MHz radio channel (that’s just wifi talk for faster connectivity). With the eero 6+, there’s enough bandwidth for the whole family to work, stream, and video chat—all at the same time.
- CONNECTIVITY YOU CAN COUNT ON - eero 6+ gives you all the connectivity with all the reliability. So you can work from home with confidence—and say goodbye to dropped video calls. Or keep your smart home running, even when you’re away.
- EXPERIENCE THE EERO TRUEMESH DIFFERENCE - eero’s patented TrueMesh technology intelligently routes traffic to reduce drop-offs and dead spots.
- SET UP IN MINUTES - The eero app guides you through setup and allows you to manage your network from anywhere.
- WORLD-CLASS CUSTOMER SUPPORT - Any questions? Our expert wifi troubleshooters are ready to help by phone in the US at +1-877-659-2347 or by [email protected]
- GETS BETTER OVER TIME - Receive automatic updates to help keep your network safe and secure. Online security and additional network management features available via a separate subscription.
- BUILT-IN SMART HOME HUB - eero 6+ contains a smart home hub to connect compatible Thread and Zigbee devices on your network with Alexa, replacing the need to buy separate hubs.
Pros & Cons
Pros
Excellent Mesh WiFi System; Takes some experimentation to get great WiFi throughout the home. I have a lot of grandkids that come over and spend the night. They complained about "my Internet" for years. Works great for the wife and me, but the grandkids were not happy. So I decided to try a mesh system. I read a lot about the various mesh systems out there and decided to give the eero system a try. I decided on the 6+ system because it was the latest release and the price was right for three units. The Pro line was just too expensive; for $400 more I did not see a real advantage. Two days after ordering the eero routers arrived. I quickly unboxed and disconnected the Netgear router and remote Access point that I placed on the upper floor. Our house is about 2,800 square foot ranch. The Internet comes into the basement. I placed the first eero router where the old Netgear router was sitting, connected it to the cable modem, then added power to the eero and used the eero app on my iPhone to begin setting it up. Set-up went pretty quick on the first unit. I then connected the open port on the main eero router to a Netgear switch. The Netgear switch is then connected to a MoCA adapter to give me wired Ethernet connections in three other locations in the house. Those three locations also have Netgear switches connected through MoCA adapters. All but one MoCA are 2.5v and one is a 1.1v MoCA. Next I put the second unit upstairs on top of a dry sink cabinet and set that one up with the app which went quickly. Finally, the third app was placed in one of the two bedrooms the grandkids like to use when visiting. Now I started to do speed tests in different rooms and locations throughout the house. I will honestly tell you that at first, I was not impressed. I expected better speeds/bandwidth then what I was seeing. Since only the main router had a wired connection, the other two units relied on a wireless connection back to the main router. In some cases I was only seeing about 50Mbs in most of the upstairs areas. Ugh! Then I decided to check the speed/bandwidt on my main computer which had a wired connection using a MoCA adapter back to a small Netgear switch next to the main eero router. I was only getting ~150Mbs! That was a "WTF" moment as it should have been around 400Mbs which is the bandwidth I have from the Internet provider. More frustration, but I put that issue on hold for a bit. I started moving the two upstairs eero devices around to different rooms and locations. Sometimes they improved, sometimes not. Frustration. Then I decided to move one of the eero devices to the media cabinet where I had a small Netgear switch connected to a MoCA adapter which of course went back to a MoCA adapter connected to the main eero router. I did not do this originally because I tried to locate the two upstairs eero devices as centrally in the house as possibly. That really changed things. Suddenly I was getting better speed and bandwidth from not only the wired upstairs eero device ~400Mbs, but also to the second wireless eero device. So now I had a better wireless signal with the wireless eero device. Then back to the main computer. Still only ~150Mbs. For grins I had a moment where a light went off....let me try shutting the power off to the 1.1v MoCA adapter. Checked the speed on the main computer again, and over 400Mbs. Now I knew that MoCA was backwards compatible, but after this I did some reading. What I missed is that when you mixed versions, the entire MoCA Ethernet will go to the bandwidth of the older MoCA in use. Makes sense now, but what did not make sense was that they same set-up was being used pre-eero install and was not an issue. Then when I reconnected power to the 1.1v MoCA, the speed not the main computer was still at ~400Mbs. I cannot explain that, but I did order a cheap Trendnet 2.5v MoCA from Amazon and replaced the old version so that now all MoCA adapters were at version 2.5. Since everything seemed to be running well now, I just experimented with placement of the remaining eero unit that was being used wirelessly seeing where I got the best speed when devices were connected to it. Finally settled on the guest bedroom. The last thing I did was change the IP addresses and range to match what I had on the old Netgear routers and even assigned four of the hardware devices fixed IP addresses as before. The grandkids have stopped complaining about the WiFi. I am also very happy. I should also add that when the grandkids are not here, we have close to 70 devices connected to the network such as Echo devices in each room, iPhones, iPads, Fire Tablets, TVs, Fire TV units. several computers including Raspberry Pi units (my ham radio hobby related Pi's), home automation with a Habitat and God only knows what else. My advice if you buy the eero system. Do not get discouraged if you run into issues. Keep trying. Mine was a bit more complicated because of the MoCA Ethernet network and all the devices I have connected. Yours may go in much easier. Try to use a wired connection to at least one eero on each floor of your home. Also keep moving the eero devices around for best placement and speed/bandwidth. If you have issues and questions, eero has great community forums. I never asked any questions, but did use the forums to locate issues/suggestions that others had which helped me quite a bit. In summary, I am very happy with the eero 6+ system.
Possibly Not Be The Best Wi-Fi Extender . . . But This Is A Dependable, Versatile Router . . . . I just started using this mesh system this weekend, so will do updates to the review, if needed in future. I actually got it a little over a month ago . . . yes, return window is closed . . . but couldn't get it to connect to a new modem I just got from Cox. Thus, I went back to my Netgear Nighthawk X6S modem, which is a few years old. That automatically connected, so decided to put off setting up eero 6+ until a later date. The only problem I had setting it up this weekend was I tried to use the same Netgear network name and password with the eero, but nothing would connect to the internet that way. So, I created a new name and password and everything connected, after I gave all the devices that new info. My usual download speed with the Netgear was around 100 Mbps, which is typical of Cox, but now it's 180 Mbps. Cox had just announced it was increasing my speed to 150 Mbps, but it never got near that until now. So far so good, but if I start having internet problems, I won't know for sure if it's Cox or eero. Cox internet has been going out all summer, when there are no outages reported, and the tech who came out said there was nothing wrong with anything. The one thing I do find at fault right now with the eero system is using one as an extender is no way near as good as my coverage with the Netgear Nighthawk router and Netgear EX8000 extender. At least not with the two eeros where I wanted them. With the eero, placing one device upstairs in an end room connected to the modem only covers the upstairs. There's no internet at all downstairs! Thus, putting an eero anywhere downstairs didn't work, since it could not connect to the internet. I had to put it in a center room upstairs, and then it gave 3-band internet coverage downstairs. I would prefer it not be in that center room, but there's obviously nothing to be done about that. Even just using the Netgear router without the extender provided 3-band internet on one floor, and 1 to 2 bands on the other floor. Hence, don't see this eero mesh system as a great Wi-Fi extender system. If the return window had not closed, I might have returned it for that reason. That is truly a disappointment and I'm not buying a third eero. Moreover, I wish there were more than two ethernet ports on each device, so I could wire anything I wanted, such as the PC, TV and DVD player. Those devices are upstairs and one of the ethernet plugs up there has to be used for the router. The Netgear has four ports, plus an additional modem one. I'm keeping the Netgear devices, in case I have to return to them. I do like the eero app, though. It makes everything simple to see and do. Plus, it's Wi-Fi 6 and obviously things are heading that way. P.S. Was downstairs getting an indoor security camera to work with the eero, and discovered the internet downstairs is actually going from three bands to one or two to totally no internet at times. Not good considering the camera needs the internet to work. P.S. 8/9/22: Got a longer ethernet cord so I could move the upstairs eero closer to the door in room, instead of it being closer to modem and Cox jack on far wall. This worked so that I was able to move second eero to downstairs foyer, hoping this would help with security camera in room next to foyer. Only thing is I noticed today on the app that the security camera is connecting to the upstairs eero, not to the downstairs one! Huh? I'm unable to connect to it on the app on my phone at times, too. (: P.S. 8/11/22: Things have improved. The security camera downstairs started connecting to the downstairs eero, instead of the upstairs one. Downstairs never appears to lose the internet any longer, either, unless the upstairs goes out first. That has happened quite a few times, but I know it's Cox, since it's going out at the usual times Cox has been going out all summer, plus the Cox modem goes out first. My internet speed is always around 170-180 Mbps, though, when the internet is working. P.P.S. 8/25/22: Well, I must increase the star rating from three to five. This is an excellent, dependable mesh system. It has particularly impressed me this week when I have been switching between using a Cox modem and a T-Mobile Gateway tower. Cox still keeps going out for hours a day, so I'm trying out T-Mobile. I hooked up the eero 6+ to the T-Mobile tower and there was no problem with that. There has been a problem at times with T-Mobile internet on my PC, however, so I then would switch back to the Cox modem. No problem for the eero 6+! Back and forth, whatever, it works all the time with whatever it is plugged into, using the same network name and password. Too bad neither Cox nor T-Mobile work all the time, but I haven't given T-Mobile internet enough of a chance yet.
Absolutely would recommend. So before I bought the eero, I was using a nighthawk router. Amazing router, nighthawk is great, but it was old, I bought it before wifi 6 and everything. I just upgraded my internet to 1g of fiber, and figured I should probably upgrade my wifi as well. First of all, just switching to a mesh system in general is amazing. Wifi extenders are a headache. This eero was cheaper than the nighthawk mesh system by a LOT. I don't know if it's as good, or better than the other mesh systems, but I know this. 1: it's sleak, and small, so it fits NICELY into my interior. 2: it's cheaper than other options! 3: the app is SUPER intuitive, and easy to use with plenty of amazing features! 4: I was having issues with my routers not connecting to my fiber (issue on my internet providers part) and the customer service was friendly, quick, and helped me figure out the problem, gave me some numbers to give to my internet providers, and they were able to fix the issue. 5: it does what it says! I'm getting 1g of wifi through out my house, very very fast speeds, and it's mesh! I have one in my living room, one in my office, and one in my gaming room. The one in my gaming room is the one set up directly to the fiber (the gateway? Not sure, not very tech savvy). What's nice is I can do a direct ethernet connection to the mesh systems which i do with my ps5 and switch in the living room and my wifes work computer in the office, and it works just fine somehow not sacrificing my wifi bandwidth? Magic. I then hook my gaming PC up to the one thats directly connected to fiber, i don't see a difference in speed, they are all utilizing very fast speeds. My smart home responds fast (mostly samsung and govee). My security system doesn't ever lag (I use eufy). It's literally mind blowing compared to my old house set up (fiber) and this mesh wifi changed my life y'all, so I can't even imagine the need for the more expensive 6e, unless your ultra rich and have a GIANT house (mine is 2300 square feet and I do not lose coverage). I ALSO have a few of the cheap echo dot 5th gens, which extend the mesh system even further! That is my review, 10/10 eero. Love the app, love the speeds, perfect!
Setup in minutes. Fast speeds. Setup could not be simpler. The single page instruction sheet contains three sentences. Down the Eero App, run the app and follow the directions, that’s it. I purchased the three unit 6+ system and have gigabit Spectrum service. Zero comparability issues. My bandwidth at the Router is 956 down 42 up. Perfect wire speed (your actual bandwidth depends on what website you access, site bandwidth, traffic, etc. but you’ll know any slow response is outside of your home and not with your equipment. You can run the router speed test at any time from the eero app. I have an in-house LAN using a separate gigabyte switch and ran Cat 6 to the second and third unit which I recommend (if possible) to achieve the fastest Wi-Fi mesh speeds. If you do not have an existing LAN and switch you can daisy chain unit two and three (modern cable into the main router, plug a Cat 6 into the second main router port and run to unit two, plug in another Cat 6 to unit two and run that to unit three.) the optional subscription adds more features that you might find usefully. I can’t speak to the longevity of the equipment yet, but setup is super simple, and the speed is wire speed of your internet service. If you’re looking for the ability to configure traffic and IP protocols on each and every internet port, you’ll need a professional/business grade system, but this is perfect for most home use.
It’s a pass for me. I had high hopes for the eero 6+ - It has 1Gb backhaul ports, 160MHz 802.11ax channels, three base stations, not a ridiculous price when on sale at $190 and integration with other Amazon products I have. Here is a summary of my network: Ubiquiti 10Gb XG-16, 16 mixed 10Gbps port Switch as the backbone, Truenas Core 13, Windows 2012r2, 2 10Gbps QNAPs, a 1Gbps Synology, VMware ESXi 7.u3g on an intel X520 10Gb dual-port NIC. All 10Gbps links are SFP fiber, 2.5Gbps devices at SPF to 2.5Gbase-T. Trendnet RB-TEW-827DRUA 2.0 is the incumbent wifi supplemented by a TP-Link AC1200 in bridge mode on wired 1Gbps ethernet. A Netgear RAX35 is also under test. Each Netgear firmware gets better but it’s not ready for prime-time – no pun intended. The wifi on the Xfinity cable modem has been disabled and it’s in bridge mode. There is MOCA to the bedrooms and my Dell XPS-15 has an Intel AX200 and UGRENN 2.5Gb USB-C NICs. The good: It was just OK with regard to ease of setup. The first node (the gateway) went up easily. Carrier rate is 2402MHz. I saw 850Mbps from my 1.2Gb provisioned internet link from my iPhone 12 Pro MAX. My laptop with an Intel AX160 Wifi card showed the same. Both are faster that the ~700Mbps from the Trendnet router I had in place. Wired using a Realtek 2.5Gbps USB-C adapter showed 950Mbps about the same as the previous router (960Mbps) The bad The second node went in easily but the throughput was only 430Mb on my cell phone, wifi laptop and worryingly my laptop with a Realtek 2.5Gb USB jumping through my 1Gbps MOCA. It looks like there can be only one wifi network and an internet isolated guest network. The wireless bands unique SSIDs can’t be split out – I let my IOT devices slug it out on 2.5GHz and my few high-speed devices run on the 5GHz. So, this was a problem for me. The individual bands also cannot have unique SSIDs but that’s not a deal-breaker. My current router can do that for 4+1 SSIDs but I didn’t expect that much flexibility. The third access point showed out of range during setup, though I had its backhaul directly connected to the backbone switch. The Trendnet is typically visible at that distance. I moved it closes to the gateway and the installation proceeded as normal. That one showed 350Mbps throughput. I upgraded all units to 6.12.2-68 and confirmed client steering is turned on. Dragging files across the network under ATTO and Chrystal Disk Mark showed terrible numbers – very asymetrical. Typically 60MBps peak is what I see in both directions There is some talk about 2.5Gb ethernet in the app but no promises. My cable modem has a 2.5Gb interface but the app shows 1Gb. I plugged the third node into a 2.5G port. It’s 1Gb, too. I also can’t control the nodes IP addresses directly though I was able to move them from 192.168.4.x to 192.168.0.x. I like to reserve the bottom 10 IPs for network devices but bunch of devices in my home beat them to it. There’s no control over channels, security type, bandwidth, prioritization. I saw port triggering but didn’t test it. For most people, this solution should be fine. It’s not bad. I mean, it works to extend a network easily but it’s not fast on the remote nodes. In the end – low throughput and 1+1 SSIDs was enough to put me off. My previous config was MUCH faster on AC at about half the price. I’ve installed some of the expensive ASUS AX routers for some people. They work as expected. I’ll keep slugging it out with the RAX35 Netgear. If/when they get the firmware right, I’ll install three of them. Ideally, I would like this solution with 2.5Gb ethernet ports and a 2.402 carrier. That would be a highly compatible wifi network that should beak the Gigabit barrier.
Super Easy Setup. Works with Spectrum! I needed to replace my aging TP-Link router before it goes out. I first bought a Ubiquiti Dream Router and spent the next two months in misery with Ubiquiti support as it would never get (or get but not keep) an internet connection from my Spectrum cable modem. I have 100mb service from Spectrum and a Cisco DOCSIS modem so not anything special! And every other router I've owned or borrowed have all connected in seconds to that same modem. So back went the UDR for refund. On to this Eero 6+. I have a small house so don't really need mesh, but do like the idea of being able to have one in the backyard during the spring and summer months, so bought the 3pk to also have one for the yard and one as a spare. The Eero 6+ was super easy to set up, it acquired the internet connection from the Spectrum modem instantly, and the whole house had internet access again in minutes. I then customized my Eero setup a bit. It ships with LAN subnet 192.168.4.x and I need 192.168.1.x to avoid having to reconfigure some of my devices. It took me a minute to find this in the app but it was easy to do. I also like to reserve local IP addresses for my cameras and some other devices, that too was very easy to add. The Eero allows device nicknames with reserved IPs which makes it easier to know what's what, my old router didn't have this so I kept a spreadsheet. I have had the Eero up for over month with no issues. As a straight gateway replacement it has been a little faster than my old router, the wifi is strong and fast, and so far it has been completely stable in all respects. (If that should change I will come back and update my review.) A few words on some minor drawbacks with Eero. 1. There is no web configuration page, only the app. The app is decent but I do prefer a web setup on a large screen with my PC. (But I found a good substitute, see below). 2. There is no export/import of settings. All the settings are stored in the account - but if you have to reset the Eero and have customized it like I have, you'll have to put all that back manually. I took screenshots just in case. 3. There is no way to 'clean up' and remove old devices. Some devices use a randomized mac address so constantly adding as a new device to the Eero and the old randomized macs are still there after some time. Eero support says eventually these will 'age off' but some users in the forums have reported they are still there after a year. 4. Eero is smallish, but works best if sitting face up (or hanging face down), and not vertical like on a wall mount. The top has the strongest signal and the bottom has a weaker signal. So plan on a shelf or upside down on the ceiling as forum users reported it works better higher up in most cases (it does in my case). WEB SETUP substitute: I have a new laptop with the latest Windows 11, and it turns out Win11 can run android apps "natively". I posted about this in the Eero forums. https://community.eero.com/t/35hsjst/web-configuration-substitute-windows-11-runs-eero-app-natively In a nutshell enable hardware virtualization, install the Windows Android Subsystem, and side-load the apk for the Eero app on Windows 11. It works. As mentioned I will come back if anything changes, but so far I am super happy with this purchase.
Cons
Almost Works. This almost works. There are a couple of problems. First is the issue of Client Steering. I have the 3 mesh system. You spread the routers around the house so that your Wi-Fi devices can connect to the nearest router. That is what the Client steering function is suppose to do. But it doesn't work. I have a smart lock on my door. So I put one of the routers in my office and one in my living room about 2 feet from my smart lock. My smart lock skipped the router that was 2 feet away and connected to the router in my office which is 35 feet away and though 3 walls. This does not make since to me. Now if I unplug the router in my office and plug it back in the smart lock will connected to the router that is 2 feet away. But then doesn't that make me the client steering. And if I have a power failure which I do often I have to reset everything again. It would be nice if the product actually worked as advertised. But it does NOT. Now for the second issue. The $10 dollars a month premium service. I decided to give it a go. And I don't see that this does anything for $10 dollars a month. It is suppose to block ads and attacks. Either my system is already protected or it doesn't do anything. After 3 weeks the app showed 0 ads blocked and 0 attacks stopped. So what is the point. I thought I would give the DDNS a go but I could not get it to work. I contacted support and they could not get it to work either. So I canceled the Premium service. UPdate : I hooked my Firestick up to the router with the RJ-45 adapter. My speed dropped from 40M to 10M. I disconnected the RJ-45 and connected back to the Wifi and my speed went back up. This seems like a defect to me. I tried the same think with a Fire Cube and I got the same results. This should not be happening. A direct connect should be much faster than Wifi but it is not. I believe this Mesh router system is designed for a house much larger than mine. My house is a humble 1500 square feet. I think if I lived in a 3000 square foot home this Mesh system would work better. But I have no data on that and no way to test it. Overall I am still using it because it is better than what I had but it would be nice if it lived up to it's promises and stop charging people for services that should be part of the basic router.
It's ok. Really expected a better overall experience. I'll preface by saying that I have a lot of home automation devices and started with a Google mesh network (is it called Nest WiFi now?). On the positive end, the eero was very easy to install. I also had a couple of v5 Echo Dots to help expand the mesh through my house. Now it's not a particularly large home, but I went from 5 Google mesh devices to 3 Eero devices and a couple of echo dots, so basically back to 5 total devices to match. Problem 1. Some of my smart home devices just would not connect to eero. They were WiFi enabled smart devices, and required 2.4GHz WiFi, and while eero supports 2.4, they still would not connect. I eventually bridged my Google mesh to eero to get them back online. (My phone was connecting to eero via IPV6, and I wondered if that was the problem. I was unable to turn off IPV6, despite there being a setting. I assumed that setting was for the WAN, but possibly it just wasn't working properly.) Problem 2. Echo Dot v5 only extends 5GHz WiFi. It does specify that, but I had to hunt to find that bit of information. Not a huge issue, but I wish I'd known. I spent a lot of time trying to extend my network into a far corner, (in an attempt to get a Ring camera to connect) only to finally realize the issue was with the 2.4GHz band. Problem 3, and the tipping point. Eero would lose internet connectivity periodically. At least once daily that I was aware of. Most typically my wife would say she can't get on the internet, so I'd poke at it. I'd have no internet for a second or two, then all fine again. The first few times I just chalked it up to my provider being flaky. Then, I started to notice it was happening every day. It was like a hiccup in the system. You'd never lose WiFi, but the internet would just go unresponsive for 20 or 30 seconds, then back to normal. Nothing was a hard fail, but there were daily pains that I just got sick of dealing with. I pulled out the Eero and reinstalled Google mesh and have had no problems since. I am not trying to sell Google mesh. In fact, I liked Eero's app better. And when it was working, I saw faster internet speeds through Eero. It just didn't work nearly as well in my environment, and the unreliability was maddening. I'm tempted to hang on to the devices and see if a firmware update comes along to fix my woes, but as of today (early 2023), I would not recommend if you have any sort of complexity in your home.
Strong Wifi, Helpful support, bad mesh switching. We've had the eero 6+ system (3 pack) installed for about a month. Upgraded from an older netgear orbi mesh system. The house is about 3600 sq' on 2 levels. The good - signal strength. The gateway is at one end of the house, the first extender is at the other end of the house on ethernet backhaul. Then we have an echo and an echo dot acting as extenders in the middle of the house. The extender #2 is in our outbuilding about 150' off the end of the house from the extender #1. We have a strong signal and great speeds in every room and also down in the outbuilding, and even several hundred feet it into our pastures on the property, which are next to the house and outbuilding. Very impressed. I was concerned that these small little units would not have strong enough antenna to push that signal out there. Glad to say I was wrong. Another good - Eero tech support was very helpful. After the eeros we're installed a few days we were having issues with VOIP and lag. I called and spoke with a rep who made some changes. Helped the issues. The not so good - app is limiting. I'm no networking genius but maybe an advanced user. It's a bummer that the old web interfaces are going away. Eero tech support was helpful, but I wouldn't have had to call at all if the app wasn't dumbed down. Why can't they have the app AND a more robust web interface? Another good- echo extenders. They seem to be a little glitchy (are sometimes showing having issues being extenders when I check in things in the app.). It's great that the devices we like and would have anyway act as extenders. The bad - mesh switching. When you roam from room to room, this system does a terrible job of switching your device. I'll be in one room with strong signal and then when I walk to the other end of the house my device will have no internet connection. It'll show strong bars, but no connection. Then apps or the web browser will time out. If I don't do anything, my phone will eventually (after about 20 seconds) drop the wifi and then jump back on. Or, I've found I can quickly toggle off and on my wifi and be back with a strong connection quickly, but isn't the whole point of the mesh router to do this for you??!! I don't know if we have a defective unit, but I've seen other users on the eero forums mention the issue. We upgraded from an older mesh system and never experienced glitches in the hand off between the router extenders. This is of course doesn't affect the stationery devices. It's a huge issue for our phones. We have another 30 days in the window for a return and are seriously considering returning it.
Simple, but NOT Smart. I am a new user of your system of three 6+ units for about 3 weeks now. I have to say that I was quite impressed with it. However I have sadly started to not like it so much. The reason is, the devices connecting to the access points don't always connect to the closest access point. Or if they were connected to the right access point, aka the one with the strongest link, they will move to another one which is less strong. I have devices that are very close to one access point yet are connecting to one that is much further away with 50% signal loss. This makes no sense. There's something wrong with the logic that you guys are using in your system or something. Most of my devices in my house, are going to the main router in the center of the house. Yet there are two other routers at each end of the home , and they have very few devices if any connected to them. Which makes zero sense. In the app there is no way to see what channel is being used by each access point, which is kind of a bummer because you really should be able to control what channels you use on your own. Or let it do it automatically. As it's doing now. We should have the choice. I say this because it could be a channel issue for all I know yet I can't see it. Also missing from the app is the signal strength, in db, of each device that the AP is seeing. Example, if I go into a device that's connected to one of the access points, it should show me the signal strength in db and I shouldn't just rely on a little icon with lines. Going further, I should be able to "kick" and allow the device to reconnect to the SSID and hopefully it'll find a better, closer, connection. Right now my only choice is to reboot the device. Some of the devices. It's not so easy to do this with. AKA home automation devices. So this feature of being able to kick a device so it is forced to reconnect to the SSID, would be a kind of a good feature to have. Devices are connected to 1 AP. And it shouldn't be like that. Right now it's not very usable anymore as speeds are poor. Speeds You can get worse with more connections to one AP because that AP has to make sure it talks to every one of the devices connected to it. Taking valuable frequency air time. Even if it's to check in to make sure it's still active, It still has to talk to it. There's always something going back and forth to maintain connection. I sincerely hope you guys are all still working on this product and will be rolling out updates to address issues like this. Unless you have suggestions and something I can do that I'm not aware of, then it looks like it might have to all go back. All 3 of my 6+ units are hardwired.
Deficient settings, app is only okay. The eero units put out pretty good signal strength and do a good job penetrating cement floors to areas above the units, however eeros hate to be plugged into unmanaged switches. I set up the first unit which was designated my gateway, and (naturally) lists a wired connection. Setting up the second unit was a challenge and is limiting. The second unit was plugged into a gigabit, unmanaged switch that was connected to the first unit, as I wanted to leverage the availability of a hardwire ethernet connection, however the second eero would instead connect wirelessly to the first unit, and there must have been some conflict with the first and second unit being connected to the switch, as connecting both eeros to each other via direct a ethernet connection allowed for the app to confirm that each were connected with a wired connection. I shouldn’t have to be relegated to a wireless connection for the second, third or more eero units that I connect to my network if I am able to leverage an ethernet connection. Also, unlike Apple’s AirPort Utility app, when adding new wireless units to the network, I am asked if each unit added will be connected via ethernet or wirelessly, something eero’s app does not offer. Tech support thought that they solved my issue by connecting both eero units to each other first to have each recognize a wired connection, then move the eeros to the switch, however this later proved to be a failure. The internet reliability and speed were poor when two or more eeros are connected to the unmanaged switch. Setting up these units should not present such issues (never happened with any of the Apple AirPort Express or Extreme units that I had ever owned). I might return the eero units and go back to the AirPort Extreme units I had been using. I will test my speed using the same placement that the eero units now occupy and will see if my speed with the AirPort Extreme units closely matches that from the eero units. It’s pretty disappointing overall.
First mesh product Eero 6t. I purchased this item to try out mesh network since I have seen a lot of products being discounted and this was a 2022 released item. I was very excited when the product arrived, and I immediately installed the until using the app as guidance. What the app doesn't tell you is that if you have to go to your isp provider web page and disable your router function on the modem/router combo. By disabling the router function the eero node is able to produce the necessary wifi signal and produce the 2.4ghz and 5ghz under the same ssid. My internet provider is Frontier and i currently have the 1gig plan. Now when I used the mesh network under the wireless backhaul the wifi signal was between 200mbps-300mbps which was slower than my previous modem/router combo which produced consistently 500mbps-600mbps. I was really disappointed with the wifi signal I was getting that I connected all the nodes and completed a wired backhaul system which provided awesome signal. The wifi signal jumped dramatically to 800mbps-900mbps, however I had cables running from multiple rooms hanging against the wall which was an eye sore and not something I wanted nor did I want to run cables through the wall. So with that being said I opted to return the eero 6t mesh system since I wanted to use the nodes as a wireless system. I am currently trying the Tp-link Deco Xe75 tri band 2 node system which was 10 dollars more during black Friday sale, and I'm getting 800mbps-900mbps using wireless backhaul. Do your research and use YouTube and search eero 6 speed test before purchasing.
Why Online?
When you are looking for product reviews or product information like features and specs before you take an action to buy it, you may see similar things here and there that major online stores top the list. Why so many people prefer shopping online?
Nowadays, being with digital stuff, people can have more options in a more intutative way easily by internet, no matter they use pc, smartphones, or tablets. Buying Amazon eero 6 plus mesh Wi is just a piece of cake if you go for online shopping that you could do shopping anytime you wish and you could easily make a cancellation if you find it not good as expected.
You can view all brands easily online for the product Amazon eero 6 plus mesh Wi before making a purchase. You can also make a price comparison with only a few clicks or touches, then sit down and go through the details while enjoying your cup of coffee. In other words, you can save money and time by shopping online.
Furthermore, you can grab good deals or even amazing deals at a very low price now and then if you go shopping online.
Aspects You Should Foucus on When Buying Amazon eero 6 plus mesh Wi Online
Is Amazon eero 6 plus mesh Wi urgently needed? Well, shopping online requires some research that you need to ask yourself some questions. To help you with that, we cover all the important ones and put up a list.
Go through the following list and feel free to do your own research while buying the Amazon eero 6 plus mesh Wi.
- Is the Amazon eero 6 plus mesh Wi worth the money?
- What advantages and disadvantages does it have?
- Does the Amazon eero 6 plus mesh Wi you choose have any eye-catching or leading features?
- What are the features or specs of the Amazon eero 6 plus mesh Wi that make it outstand?
- Does the Amazon eero 6 plus mesh Wi come with a warranty?
- Does it have any cons or defects that existing customers have found out?
- Where can you get enough information for Amazon eero 6 plus mesh Wi?
- Where can you get the best Amazon eero 6 plus mesh Wi?
Easily, you may come up with more questions than those on the above list, just ask yourself. Research and then research again, until you get the answers or you are satisfied with it.
Benefits of Shopping Online
There are many benefits for you to shop online. We have put up some for your reference when shopping online. Let us see what benefits online shopping offers:
Best Price
Online shopping has been well-known for offering products at the possible best prices. As an online platform, it cooperates with many dealers, manufacturers and sellers to offer daily good deals directly, which leaves no room in the middle and reduce additional cost.
Easy to Compare
You can easily do a product comparison at many online shopping websites at a time, casually and relaxably at home. With the ratings, you can decide which product should be your choice, which allows you to have better experience than that of traditional shopping.
High Reliability
Online shopping is reliable since customer reviews are posted directly, no matter they are good or bad. With customer reviews, there is still room for you to make a decision if you found any cons of the product in customer reviews.
Great Customer Service
You can receive best ever customer service from online shopping because competition is too fierce, which makes you feel very good to shop online.
Large User Base
There is a large user base of online shopping nowadays. Hundreds of thousands of people go shopping online these days, especially after the pandemic, people are more likely and willing to do that than driving to stores.
Vast Variety
You can have a vast variety of products to choose from if you go shopping online. If model A / brand A does not meet your requirements, you can easily turn to model B / brand B, or any other you like, which makes online shopping flexible.
Convenience
No specific location, time or transportation is required for online shopping. Instead, all you need is just a pc or a smartphone with internet connected. Online shopping is so convenient that you can sit down enjoying your cup of tea or coffee, make your choice and pay it with just few clicks or touches, then wait for your delivery.
How to Choose Your Amazon eero 6 plus mesh Wi
First of first, you need to follow a brief guide as follows in order to buy something like the Amazon eero 6 plus mesh Wi. So let's go through the check list before you take an action.
Price
First, check the price tag for a possible best deal. You can make a price comparison between different sellers or platforms and choose the one that you are satisfied with.
Brand
Second, before you buy the Amazon eero 6 plus mesh Wi, you should take the brand of the product into account. You may learn to seperate the products for different brands to make a right decision.
Warranty
Third, a warranty is a must for the Amazon eero 6 plus mesh Wi. Nobody likes to spend money on anything that does not last long, right?
Functionality
Another thing to check for your Amazon eero 6 plus mesh Wi is functionality. You can accomplish that by checkcing the features and / or specs. The more features / specs you see, the more functions your Amazon eero 6 plus mesh Wi could offer.
Dimensions
Moreover, you must check the dimensions for your Amazon eero 6 plus mesh Wi because wrong size may result in wasting time and money. It is highly recommended to learn about the dimensions of the product before any action.
Color
In addition to the above, you should check the color for your Amazon eero 6 plus mesh Wi as well. Does it offer color options? Do you like the color of the product? Then check if the color you have selected is available.
Existing Customer Reviews
The last thing to check is customer reviews. No matter how many the features are, no matter how powerful the specs are, you must verify that by lookig into existing customer reviews generally listed right after the features and specs, or before the bottom of the page. See what they say about the products, how they feel and probably an update after one or two months' use. Finally, make a decision to buy or not to.
Conclusion
This is a basic wrap up for buying Amazon eero 6 plus mesh Wi online. We hope you will find this helpful. You can follow this shopping guide to get the possible best deal for your own online.
Furthermore, you can do more research yourself to learn more about the best Amazon eero 6 plus mesh Wi. If our shopping guide helps you, please share it.
Wish you get a great deal!
#CommissionsEarned
As an Amazon Associate I earn from qualifying purchases.
